Dell W-7005 AOS 6.4.x CLI Reference Guide - Page 1129

Parameter Rx RTS Frames (PPS) Rx CTS Frames Rx CTS Frames (PPS) RX PS Poll Frames RX CRC Errors RX PLCP Errors Rx Frames Dropped Rx PHY Events Rx RADAR Events RX Interrupts RX Overrun Rx undecryptable RX STBC Frames RX LDPC Frames Rx data Mbps Rx Mbps Description Rate at which RTS frames were received, in packets per second. Clear To Send (CTS) frames received. This type of frame are used to verify that a client is ready to receive information. Rate at which CTS frames were received, in packets per second. Power-Save Poll (PS-Poll) frames received. When a client exits a power-saving mode, it transmits a PS-Poll frame to the AP to retrieve any frames buffered while it was in power-saving mode. Cyclic Redundancy Check (CRC) is a data sequence that is sent with a frame to help verify if all the data received correctly. Possible CRC error causes include: l Hardware malfunction l Loose or unconnected cables l RF interference, such as overlapping access point coverage on a channel or interfering 2.4-GHz signals from devices like microwave ovens l and wireless handset phones Physical Layer Convergence Protocol (PLCP) errors. Number of received frames that were dropped. The number of Physical Layer Events, that are not 802.11 packets, detected by radio as part of its normal receive operation. Number of times an AP detects a radar signature. Dell APs are DFS-compliant detects a radar signature, it will change its channel. The number of receive interrupts received by the CPU from the radio. The number of Receive FIFO overruns. Number of non-decryptable frames received. Number of received frames with STBC enabled. Number of received frames with LDPC enabled. Data packets received at the specified rate (in Mbps). Packets received at the specified rate (in Mbps). 1129 | show ap debug radio-stats Dell Networking W-Series ArubaOS 6.4.x | User Guide