Dell W-7005 AOS 6.4.x CLI Reference Guide - Page 1247

Parameter switch-ip Description Sort the output of this command by controller ip address. sort-direction Select a sort direction for the output of this command. ascending Sort the output in ascending order. descending Sort the output in descending order. start Start displaying the output of this command at a chosen index number by entering the index number of the AP at which command output should start. switch Display information for APs associated with a specific controller by entering the IP address of that controller. Example The output of the command shows that the AP is aware of five other access points, three of which are active. (host) #show ap radio-database AP Radio Database Name Group AP Type IP Address Mode/Chan/EIRP/Cli 11a Mode/Chan/EIRP/Cli ---- mp3 default 125 10.3.129.96 /10/0/0 AP(HT)/100/4/0 sw-ad-ap124-11 default 124 10.3.129.99 /10/0/0 AP(HT)/100+/2/0 sw-ad-ap125-13 default 125 10.3.129.98 /10/2.5/0 AP(HT)/100/4/0 sw-ad-ap65-19 default 65 10.3.129.95 Status -----Up 14h:45m:0s Up 14h:43m:18s Up 14h:49m:36s Down Flags ----M M M Switch IP --------10.3.129.232 10.3.129.232 10.3.129.232 10.3.129.232 11g ---------AP(HT) AP(HT) AP(HT) Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed R = Remote AP; I = Inactive; X = Maintenance Mode; P = PPPoE AP; B = Built-in AP S = RFprotect Sensor; d = Disconnected Sensor; H = Using 802.11n license M = Mesh node; Y = Mesh Recovery The output of this command includes the following information: Column Name Group AP Type IP address Description Name of the AP. AP group to which the AP is associated. AP model type. IP address of the AP. 1247 | show ap radio-database Dell Networking W-Series ArubaOS 6.4.x | User Guide