Dell W-7005 AOS 6.4.x CLI Reference Guide - Page 772

Parameter spectrum-load-balancing spectrum-monitoring Description considered part of the same RF neighborhood for load balancing, and will not recognize RF neighborhoods defined by the ARM feature. Range The Spectrum Load Balancing - feature helps optimize network resources by balancing clients across channels, regardless of whether the AP or the controller is responding to the wireless clients' probe requests. If enabled, the controller compares whether or not an AP has more clients than its neighboring APs on other channels. If an AP's client load is at or over a predetermined threshold as compared to its immediate neighbors, or if a neighboring Dell AP on another channel does not have any clients, load balancing will be enabled on that AP. This feature is disabled by default. Issue this command to turn APs in - ap-mode into a hybrid AP. An AP in hybrid AP mode will continue to serve clients as an access point while it scans and analyzes spectrum analysis data for a single radio channel. For further details on using hybrid APs and spectrum monitors to examine the radio frequency (RF) environment in which the Wi-Fi network is operating, refer to the Spectrum Analysis chapter of the Dell Networking W-Series ArubaOS User Guide. For a list of APs that can be converted into a spectrum monitor or hybrid AP, refer to the Spectrum Analysis chapter of the Dell Networking W-Dell Networking W-Series ArubaOS 6.4.x User Guide. Default disabled default Dell Networking W-Series ArubaOS 6.4.x | User Guide rf dot11g-radio-profile | 772