Dell W-Series 228 Instant 6.5.1.0-4.3.1.0 User Guide - Page 135

2. On the Access tab, move the slider to Role-based access control by using the scroll bar. 3. Select a role or create a new one if required. 4. Click New to add a new rule. The New Rule window is displayed. 5. In the New Rule window, specify the following parameters. The following figures show the parameters for captive portal role configuration: Figure 32 Captive Portal Rule for Internal Splash Page Type Figure 33 Captive Portal Rule for External Splash Page Type Table 30: Captive Portal Rule Configuration Parameters Parameter Description Rule type Select Captive Portal from the RuleType drop-down list. Splash Page Type Select any of the following attributes: l Select Internal to configure a rule for internal captive portal authentication. l Select External to configure a rule for external captive portal authentication. Internal If Internal is selected as splash page type, perform the following steps: l Under Splash Page Visuals, use the editor to specify display text and colors for the initial page that would be displayed to users connecting to the network. The initial page asks for user credentials or email, depending on the splash page type configured. l To change the color of the splash page, click the Splash page rectangle and select the required color from the Background Color palette. Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide Captive Portal for Guest Access | 135