Dell W-Series 228 Instant 6.5.1.0-4.3.1.0 User Guide - Page 351
Upgrading an Image Using CLI, Upgrading to a New Version Manually
View all Dell W-Series 228 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 351 highlights
n Upgrade successful-When the upgrading is successful. n Upgrade failed-When the upgrading fails. If the upgrade fails and an error message is displayed, retry upgrading the W-IAP. Upgrading to a New Version Manually If the Automatic Image Check feature is disabled, you can obtain an image file from a local file system or from a TFTP or HTTP URL. To manually check for a new firmware image version and obtain an image file: 1. Navigate to Maintenance > Firmware. 2. Under Manual section, perform the following steps: l Select the Image file option. This method is only available for single-class W-IAPs. The following examples describe the image file format for different W-IAP models: n For W-IAP334/335-DellInstant_Lupus_6.5.1.0-4.3.1.0.0_xxxx n For W-IAP314/315 and W-IAP324/325-DellInstant_Hercules_6.5.1.0-4.3.1.0.0_xxxx n For W-IAP224/225, W-IAP228, W-IAP214/215, W-IAP274/275, W-IAP277-DellInstant_Centaurus_ 6.5.1.0-4.3.1.0.0_xxxx n For W-IAP204/205 and W-IAP205H-DellInstant_Taurus_6.5.1.0-4.3.1.0.0_xxxx n For W-IAP155/155P-DellInstant_Aries_6.5.1.0-4.3.1.0.0_xxxx n For W-IAP108/109, W-IAP103, and W-IAP114/115-DellInstant_Pegasus_6.5.1.0-4.3.1.0.0_xxxx l Select the Image URL option. Select this option to obtain an image file from a TFTP, FTP, or HTTP URL. n HTTP - http:///. For example, http:///DellInstant_Hercules_ 6.5.1.0-4.3.1.0.0_xxxx n TFTP - tftp:///. For example, tftp:///DellInstant_Hercules_6.5.1.0- 4.3.1.0.0_xxxx n FTP - ftp:///. For example, ftp:///DellInstant_Hercules_6.5.1.0- 4.3.1.0.0_xxxx 3. Clear the Reboot all APs after upgrade check box if required. The Reboot all APs after upgrade check box is selected by default to allow the W-IAPs to reboot automatically after a successful upgrade. To reboot the W-IAP at a later time, clear the Reboot all APs after upgrade check box. 4. Click Upgrade Now to upgrade the W-IAP to the newer version. Upgrading an Image Using CLI To upgrade an image using a HTTP, TFTP, or FTP URL: (Instant AP)# upgrade-image To upgrade an image without rebooting the W-IAP: (Instant AP)# upgrade-image2-no-reboot To view the upgrade information: (Instant AP)# show upgrade info Image Upgrade Progress Mac IP Address --- --------- d8:c7:c8:c4:42:98 10.17.101.1 Auto reboot :enable Use external URL :disable AP Class -------Hercules Status -----image-ok Image Info ---------image file Error Detail -----------none Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide W-IAP Maintenance | 351