Dell W-Series 228 Instant 6.5.1.0-4.3.1.0 User Guide - Page 81

Table 21: WLAN Configuration Parameters Parameter Description For more information on WMM traffic and DSCP mapping, see Wi-Fi Multimedia Traffic Management on page 273. For voice traffic and Spectralink Voice Prioritization, configure the following parameters: l Traffic Specification (TSPEC)-To prioritize time-sensitive traffic such as voice traffic initiated by the client, select the Traffic Specification (TSPEC) check box. l TSPEC Bandwidth-To reserve bandwidth, set the TPSEC bandwidth to the desired value within the range of 200-600,000 Kbps. The default value is 2000 Kbps. l Spectralink Voice Protocol (SVP)-Select the check box to prioritize voice traffic for SVP handsets. Content filtering Select Enabled to route all DNS requests for the non-corporate domains to OpenDNS on this network. Inactivity timeout Specify an interval for session timeout in seconds, minutes, or hours. If a client session is inactive for the specified duration, the session expires and the user is required to log in again. You can specify a value within the range of 60-86,400 seconds (24 hours) for a client session. The default value is 1000 seconds. Deauth Inactive Clients Select Enabled to allow the W-IAP to send a deauthentication frame to the inactive client and clear client entry. SSID Select the Hide check box if you do not want the SSID (network name) to be visible to users. Select the Disable check box if you want to disable the SSID. On selecting this, the SSID will be disabled, but will not be removed from the network. By default, all SSIDs are enabled. Out of service (OOS) Enable or disable the SSID based on the following OOS states of the W-IAP: l VPN down l Uplink down l Internet down l Primary uplink down The network will be out of service when selected event occurs and the SSID is enabled or disabled as per the configuration settings applied. For example, if you select the VPN down option from the drop-down list and set the status to enabled, the SSID is enabled when the VPN connection is down and is disabled when the VPN connection is restored. OOS time (global) Configure a hold time interval in seconds within a range of 30-300 seconds, after which the out-of-service operation is triggered. For example, if the VPN is down and the configured hold time is 45 seconds, the effect of this out-of-service state impacts the SSID availability after 45 seconds. Max clients threshold Specify the maximum number of clients that can be configured for each Basic Service Set Identifier (BSSID) on a WLAN. You can specify a value within the range of 0-255. The default value is 64. NOTE: This is a per-ap configuration setting, hence the maximum client threshold is set Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide Wireless Network Profiles | 81