Dell W-Series 228 Instant 6.5.1.0-4.3.1.0 User Guide - Page 255

3. Click OK. In the CLI To configure access point control parameters: (Instant AP)(config)# arm (Instant AP)(ARM)# a-channels (Instant AP)(ARM)# min-tx-power (Instant AP)(ARM)# max-tx-power (Instant AP)(ARM)# client-aware (Instant AP)(ARM)# wide-bands {|||} (Instant AP)(ARM)# scanning (Instant AP)(ARM)# 80mhz-support (Instant AP)(ARM)# end (Instant AP)# commit apply Verifying ARM Configuration To view ARM configuration: (Instant AP)# show arm config Minimum Transmit Power Maximum Transmit Power Band Steering Mode Client Aware Scanning Wide Channel Bands 80Mhz Support Air Time Fairness Mode Client Match CM NB Matching Percent CM Calculating Interval CM SLB Threshold CM SLB Balancing Mode CM max client match req CM max adoption Custom Channels 2.4 GHz Channels Channel Status 1 enable 2 disable 3 disable 4 disable 5 disable 6 enable 7 disable 8 disable 9 disable 10 disable 11 enable 12 disable 13 disable 1+ enable 2+ disable 3+ disable 4+ disable 5+ disable 6+ disable 7+ enable :18 :127 :prefer-5ghz :enable :enable :5ghz :enable :fair-access :disable :75 :30 :2 :channel based :5 :5 :No Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide Adaptive Radio Management | 255