Dell W-Series 228 Instant 6.5.1.0-4.3.1.0 User Guide - Page 190

In the Instant UI To configure management subnets: 1. Navigate to Security > Inbound Firewall. The Inbound Firewall tab contents are displayed. Figure 43 Firewall Settings-Management Subnets 2. To add a new management subnet: l In the Add new management subnet section, enter the subnet address in Subnet. l Enter the subnet mask in Mask. l Click Add. 3. To add multiple subnets, repeat step 2. 4. Click OK. In the CLI To configure a management subnet: (Instant AP)(config) # restricted-mgmt-access (Instant AP)(config) # end (Instant AP)# commit apply Configuring Restricted Access to Corporate Network You can configure restricted corporate access to block unauthorized users from accessing the corporate network. When restricted corporate access is enabled, corporate access is blocked from the uplink port of master W-IAP, including clients connected to a slave W-IAP. You can configure restricted corporate access by using the Instant UI or the CLI. In the Instant UI To configure restricted corporate access: 1. Navigate to Security > Inbound Firewall . The Inbound Firewall (see Figure 43) tab contents are displayed. 2. Select Enabled from the Restrict Corporate Access drop-down list. 3. Click OK. In the CLI To configure restricted management access: (Instant AP)(config) # restrict-corp-access (Instant AP)(config) # end (Instant AP)# commit apply Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide Roles and Policies | 190