Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 User Guide - Page 176

Loading Certificates through Instant CLI To upload a CA, server, or captive portal certificate: (Instant AP)# copy tftp {cpserver cert format {p12|pem}| radsec {ca|cert } format pem|system {1xca format {der|pem}| 1xcert format pem}} To download RadSec certificates: (Instant AP)# download-cert radsec ftp://192.0.2.7 format pem [psk ] (Instant AP)# download-cert radsecca ftp://192.0.2.7 format pem Removing Certificates To clear a certificate: (Instant AP)# clear-cert {ca|cp|radsec|radsecca|server} Loading Certificates Through W-AirWave You can manage certificates using W-AirWave. The AMP directly provisions the certificates and performs basic certificate verification (such as certificate type, format, version, serial number, and so on) before accepting the certificate and uploading to a W-IAP network. The AMP packages the text of the certificate into an HTTPS message and sends it to the VC. After the VC receives this message, it draws the certificate content from the message, converts it to the right format, and saves it on the RADIUS server. To load a certificate in W-AirWave: 1. Navigate to Device Setup > Certificate and then click Add to add a new certificate. The Certificate window is displayed. 2. Enter the certificate Name, and click Choose File to browse and upload the certificate. Figure 37 Loading Certificate through W-AirWave 3. Select the appropriate Format that matches the certificate filename. l Select Server Cert for certificate Type, and provide the passphrase if you want to upload a server certificate. l Select either Intermediate CA or Trusted CA certificate Type, if you want to upload a CA certificate. 176 | Authentication and User Management Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide