Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 User Guide - Page 258

Table 57: Radio Configuration Parameters Parameter Description Background spectrum monitoring Select Enabled to allow the W-IAPs in access mode to continue with normal access service to clients, while performing additional function of monitoring RF interference (from both neighboring W-IAPs and non Wi-Fi sources such as, microwaves and cordless phones) on the channel they are currently serving clients. Customize ARM power range Select the check box and select a minimum (Min Power) and maximum (Max Power) power range value for the 2.4 GHz and 5 GHz band frequencies. The default value is 3 dBm. Unlike the configuration in the ARM profile, the transmit power of all radios in the Radio profile do not share the same configuration. Very high throughput Ensure that this check box is selected to enable very high throughput (VHT) on 802.11ac devices with 5 GHz radio. If VHT is enabled for the 5 GHz radio profile on a W-IAP, it is automatically enabled for all SSIDs configured on a W-IAP. By default, VHT is enabled on all SSIDs. If you want the 802.11ac W-IAPs to function as 802.11n W-IAPs, clear the check box to disable VHT on these devices. 5. Click OK. In the CLI To configure 2.4 GHz radio settings: (Instant AP)(config)# rf dot11g-radio-profile (Instant AP)(RF dot11g Radio Profile)# beacon-interval (Instant AP)(RF dot11g Radio Profile)# legacy-mode (Instant AP)(RF dot11g Radio Profile)# spectrum-monitor (Instant AP)(RF dot11g Radio Profile)# dot11h (Instant AP)(RF dot11g Radio Profile)# interference-immunity (Instant AP)(RF dot11g Radio Profile)# csa-count (Instant AP)(RF dot11g Radio Profile)# max-distance (Instant AP)(RF dot11g Radio Profile)# max-tx-power (Instant AP)(RF dot11g Radio Profile)# min-tx-power (Instant AP)(RF dot11g Radio Profile)# end (Instant AP)# commit apply To configure 5 GHz radio settings: (Instant AP)(config)# rf dot11a-radio-profile (Instant AP)(RF dot11a Radio Profile)# beacon-interval (Instant AP)(RF dot11a Radio Profile)# legacy-mode (Instant AP)(RF dot11a Radio Profile)# spectrum-monitor (Instant AP)(RF dot11a Radio Profile)# spectrum-band (Instant AP)(RF dot11a Radio Profile)# dot11h (Instant AP)(RF dot11a Radio Profile)# interference-immunity (Instant AP)(RF dot11a Radio Profile)# max-distance (Instant AP)(RF dot11a Radio Profile)# max-tx-power (Instant AP)(RF dot11a Radio Profile)# min-tx-power (Instant AP)(RF dot11a Radio Profile)# csa-count (Instant AP)(RF dot11a Radio Profile)# end (Instant AP)# commit apply To disable VHT on a 5 GHz radio profile: (Instant AP)(config)# rf dot11a-radio-profile (Instant AP)(RF dot11a Radio Profile)# very-high-throughput-disable 258 | Adaptive Radio Management Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide