Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 User Guide - Page 58
Table 17, System Parameters
![]() |
View all Dell W-Series 304 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Table 17: System Parameters Parameter Timezone Preferred Band AppRF Visibility Description CLI Configuration NTP helps obtain the precise time from a server and regulate the local time in each network element. Connectivity to a valid NTP server is required to synchronize the W-IAP clock to set the correct time. If NTP server is not configured in the W-IAP network, an W-IAP reboot may lead to variation in time data. By default, the W-IAP tries to connect to pool.ntp.org to synchronize time. The NTP server can also be provisioned through the DHCP option 42. If the NTP server is configured, it takes precedence over the DHCP option 42 provisioned value. The NTP server provisioned through the DHCP option 42 is used if no server is configured. The default server pool.ntp.org is used if no NTP server is configured or provisioned through DHCP option 42. NOTE: To facilitate zero-touch provisioning using the AMP or Activate, you must configure the firewall and wired infrastructure to either allow the NTP traffic to pool.ntp.org, or provide alternative NTP servers under DHCP options. Timezone in which the W-IAP must operate. You can also enable daylight saving time (DST) on W-IAPs if the time zone you selected supports the daylight saving time. When enabled, the DST ensures that the W-IAPs reflect the seasonal time changes in the region they serve. To configure timezone: (Instant AP)(config) # clock timezone To configure daylight saving time: (Instant AP)(config) # clock summer-time recurring The preferred band for the W-IAP. NOTE: Reboot the W-IAP after modifying the radio profile for changes to take effect. (Instant AP)(config) # rf-band Select one of the following options from the AppRF visibility drop-down list. l App-Displays only inbuilt Deep Packet Inspection (DPI) data. l WebCC-Displays the DPI data hosted on the cloud. (Instant AP)(config) # dpi Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide Initial Configuration Tasks | 58
![](/manual_guide/products/dell-wseries-304-instant-65104310-user-guide-ea963f5/58.png)