Dell W-Series 324 Instant 6.4.3.1-4.2 User Guide - Page 103
In the CLI, Virtual Controller assigned, Default, Custom, Network assigned, Client VLAN assignment
![]() |
View all Dell W-Series 324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
3. Based on the type client IP assignment mode selected, you can configure the VLAN assignment for clients as described in the following table: Table 21: IP and VLAN Assignment for WLAN SSID Clients Client IP Assignment Client VLAN Assignment Virtual Controller assigned If Virtual Controller assigned is selected for client IP assignment, the Virtual Controller creates a private subnet and VLAN on the W-IAP for the wireless clients. The network address translation for all client traffic that goes out of this interface is carried out at the source. This setup eliminates the need for complex VLAN and IP address management for a multi-site wireless network. On selecting this option, the following client VLAN assignment options are displayed: l Default: When selected, the default VLAN as determined by the Virtual Controller is assigned for clients. l Custom: When selected, you can specify a custom VLAN assignment option. You can select an existing DHCP scope for client IP and VLAN assignment or you can create a new DHCP scope by selecting New. For more information on DHCP scopes, see Configuring DHCP Scopes on page 215. Network assigned If Network assigned is selected, you can specify any of the following options for the Client VLAN assignment. l Default- On selecting this option, the client obtains the IP address in the same subnet as the W-IAPs. By default, the client VLAN is assigned to the native VLAN on the wired network. l Static- On selecting this option, you need to specify a single VLAN, a comma separated list of VLANS, or a range of VLANs for all clients on this network. Select this option for configuring VLAN pooling. l Dynamic- On selecting this option, you can assign the VLANs dynamically from a Dynamic Host Configuration Protocol (DHCP) server. To create VLAN assignment rules, click New to assign the user to a VLAN. In the New VLAN Assignment Rule window, enter the following information: l Attribute- Select an attribute returned by the RADIUS server during authentication. l Operator- Select an operator for matching the string. l String- Enter the string to match l VLAN- Enter the VLAN to be assigned. 4. Click Next to configure security settings for the employee network. For more information, see Configuring Security Settings for a WLAN SSID Profile on page 104. In the CLI To manually assign VLANs for WLAN SSID users: (Instant AP)(config)# wlan ssid-profile (Instant AP)(SSID Profile )# vlan (Instant AP)(SSID Profile )# end (Instant AP)# commit apply To enforce DHCP-based VLAN assignment: (Instant AP)(config)# wlan ssid-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Wireless Network Profiles | 103
![](/manual_guide/products/dell-wseries-324-instant-643142-user-guide-fd65a7e/103.png)