Dell W-Series 324 Instant 6.4.3.1-4.2 User Guide - Page 353

3. Click New. 4. Enter the string in the New Community String text box. 5. Click OK. 6. To delete a community string, select the string, and click Delete. Creating community strings for SNMPv3 Using Instant UI To create community strings for SNMPv3: 1. Click System link at the top right corner of the Instant main window. The system window is displayed. 2. Click the Monitoring tab. The SNMP configuration parameters displayed in the Monitoring tab. 3. Click New in the Users for SNMPV3 box. A window for specifying SNMPv3 user information is displayed. Figure 112 SNMPv3 User 4. Enter the name of the user in the Name text box. 5. Select the type of authentication protocol from the Auth protocol drop-down list. 6. Enter the authentication password in the Password text box and retype the password in the Retype text box. 7. Select the type of privacy protocol from the Privacy protocol drop-down list. 8. Enter the privacy protocol password in the Password text box and retype the password in the Retype text box. 9. Click OK. 10.To edit the details for a particular user, select the user and click Edit. 11.To delete a particular user, select the user and click Delete. Configuring SNMP Community Strings in the CLI To configure an SNMP engine ID and host: (Instant AP)(config)# snmp-server engine-id (Instant AP)(config)# host version {1 udp-port }|{2c|3 [inform] [udp-port ]} To configure SNMPv1 and SNMPv2 community strings: (Instant AP)(config)# snmp-server community To configure SNMPv3 community strings: (Instant AP)(config)# snmp-server user To view SNMP configuration: (Instant AP)# show snmp-configuration Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Monitoring Devices and Logs | 353