Dell W-Series 324 Instant 6.4.3.1-4.2 User Guide - Page 228
In the CLI, Example, Configuring an L2-GRE Tunnel, Configuring Manual GRE Parameters
View all Dell W-Series 324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
6. Click Next to create routing profiles. When the IPsec tunnel configuration is completed, the packets that are sent from and received by a W-IAP are encrypted. In the CLI To configure an IPSec VPN tunnel: (Instant AP)(config)# vpn primary (Instant AP)(config)# vpn backup (Instant AP)(config)# vpn fast-failover (Instant AP)(config)# vpn hold-time (Instant AP)(config)# vpn preemption (Instant AP)(config)# vpn monitor-pkt-send-freq (Instant AP)(config)# vpn monitor-pkt-lost-cnt (Instant AP)(config)# vpn reconnect-user-on-failover (Instant AP)(config)# vpn reconnect-time-on-failover (Instant AP)(config)# end (Instant AP)# commit apply Example (Instant AP)(config)# vpn primary 192.0.2.18 (Instant AP)(config)# vpn backup 192.0.2.18 (Instant AP)(config)# vpn fast-failover (Instant AP)(config)# vpn preemption (Instant AP)(config)# ip dhcp distl2 (Instant AP)(DHCP Profile "distL2")# server-type Distributed,L2 (Instant AP)(DHCP Profile "distL2")# server-vlan 2 (Instant AP)(DHCP Profile "distL2")# ip-range 10.15.205.0 10.15.205.255 (Instant AP)(DHCP Profile "distL2")# subnet-mask 255.255.255.0 (Instant AP)(DHCP Profile "distL2")# lease-time 86400 (Instant AP)(DHCP Profile "distL2")# default-router 10.15.205.254 (Instant AP)(DHCP Profile "distL2")# dns-server 10.13.6.110,10.1.1.50 (Instant AP)(DHCP Profile "distL2")# domain-name dell.com (Instant AP)(DHCP Profile "distL2")# client-count 5 (Instant AP)(config)# ip dhcp local (Instant AP)(DHCP Profile "local")# server-type Local (Instant AP)(DHCP Profile "local")# server-vlan 200 (Instant AP)(DHCP Profile "local")# subnet 172.16.200.1 (Instant AP)(DHCP Profile "local")# subnet-mask 255.255.255.0 (Instant AP)(DHCP Profile "local")# lease-time 86400 (Instant AP)(DHCP Profile "local")# dns-server 10.13.6.110,10.1.1.50 (Instant AP)(DHCP Profile "local")# domain-name dell.com To view VPN configuration: Instant Access Point# show vpn config Configuring an L2-GRE Tunnel This section describes the following procedures: l Configuring Manual GRE Parameters l Configuring Dell GRE Parameters Configuring Manual GRE Parameters To configure a GRE tunnel between the W-IAP and controller using either the Virtual Controller IP or the W-IAP IP, based on the following W-IAP settings: l If a Virtual Controller IP is configured and if Per-AP tunnel is disabled, use Virtual Controller IP. l If a Virtual Controller IP is not configured or if Per-AP tunnel is enabled, use the W-IAP IP. 228 | VPN Configuration Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide