Dell W-Series 324 Instant 6.4.3.1-4.2 User Guide - Page 172
In the CLI, Associate Server Profiles to a Network Profile, DRP IP, DRP Mask, DRP VLAN, DRP Gateway
![]() |
View all Dell W-Series 324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
2. To create a new server, click New and configure the required RADIUS server parameters as described in Table 31. 3. Ensure that the following dynamic RADIUS proxy parameters are configured: l DRP IP- IP address to be used as source IP for RADIUS packets l DRP Mask-Subnet mask of the DRP IP address. l DRP VLAN-VLAN in which the RADIUS packets are sent. l DRP Gateway-Gateway IP address of the DRP VLAN. 4. Click OK. In the CLI To configure dynamic RADIUS proxy parameters: (Instant AP)(config)# wlan auth-server (Instant AP)(Auth Server )# ip (Instant AP)(Auth Server )# key (Instant AP)(Auth Server )# port (Instant AP)(Auth Server )# acctport (Instant AP)(Auth Server )# nas-id (Instant AP)(Auth Server )# nas-ip (Instant AP)(Auth Server )# timeout (Instant AP)(Auth Server )# retry-count (Instant AP)(Auth Server )# deadtime (Instant AP)(Auth Server )# drp-ip vlan gateway (Instant AP)(Auth Server )# end (Instant AP)# commit apply Associate Server Profiles to a Network Profile To associate the authentication server profiles with a network profile: 1. Access the WLAN wizard or Wired Settings window. l To open the WLAN wizard, select an existing SSID on the Network tab, and click edit. l To open the wired settings window, click More > Wired. In the Wired window, select a profile and click Edit. You can also associate the authentication servers when creating a new WLAN or wired profile. 2. Click the Security tab. 3. If you are configuring the authentication server for a WLAN SSID, under Security tab, slide to Enterprise security level. 4. Ensure that an authentication type is enabled. 5. From the Authentication Server 1 drop-down list, select the server name on which dynamic RADIUS proxy parameters are enabled. You can also create a new server with RADIUS and RADIUS proxy parameters by selecting New. 6. Click Next and then click Finish. 7. To assign the RADIUS authentication server to a network profile, select the newly added server when configuring security settings for a wireless or wired network profile. You can also add an external RADIUS server by selecting New for Authentication Server when configuring a WLAN or wired profile. For more information, see Configuring Security Settings for a WLAN SSID Profile on page 104 and Configuring Security Settings for a Wired Profile on page 121. In the CLI To associate an authentication server to a WLAN SSID: Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Authentication and User Management | 172
![](/manual_guide/products/dell-wseries-324-instant-643142-user-guide-fd65a7e/172.png)