Dell XPS /Inspiron M170 Service Manual - Page 3
Replacing the Battery Latch Assembly - drivers
View all Dell XPS /Inspiron M170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
2 battery latch assembly 9. Remove the spring from the hook on the bottom panel by lifting it up and away with a screwdriver or a plastic scribe. 1 hook 2 spring 10. Remove the plastic battery latch assembly by twisting the assembly slightly and lifting it out of the channel and away from the bottom panel. 1 battery latch assembly Replacing the Battery Latch Assembly 1. Insert the plastic latch assembly into the channel on the bottom panel and press into place. 2. Hook the spring over the hook on the bottom panel using a small screw driver or plastic scribe. 3. Place the battery latch release under the bottom panel of the computer and line it up with the hole in the panel, then replace the screw in the assembly. Ensure that the newly installed latch moves smoothly and freely when pushed and released. 4. Replace the hard drive bay and reinsert the three M2 x 3-mm screws. 5. Replace the system board. 6. Replace the other components removed in "Removing the Battery Latch Assembly" in reverse order. Back to Contents Page