Dell XPS /Inspiron M170 Service Manual - Page 5
Computer Orientation, Screw Identification
![]() |
View all Dell XPS /Inspiron M170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
3. Disconnect any telephone or network cables from the computer. 4. Disconnect your computer and all attached devices from their electrical outlets. 5. Close the display and turn the computer upside down on a flat work surface. NOTICE: To avoid damaging the system board, you must remove the main battery before you service the computer. 6. Slide the battery-bay latch release on the bottom of the computer and remove the battery from the bay. 1 battery-bay latch release 2 battery 7. Turn the computer top-side up. 8. Remove any installed PC Cards from the PC Card slot. Computer Orientation 1 front 2 left 3 back 4 right Screw Identification When you are removing and replacing components, print "Screw Identification" as a tool to lay out and keep track of the screws. The placemat provides the
![](/manual_guide/products/dell-xps-inspiron-m170-service-manual-29ef977/5.png)