Dell XPS 15 9510 Service Manual - Page 38
Steps, Next steps
View all Dell XPS 15 9510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Steps 1. Slide the palm-rest and keyboard assembly under the display-assembly hinges. 2. Align the screw holes on the palm-rest assembly with the screw holes on the right and left display-assembly hinges. 3. Replace the four screws (M2.5x5.5) that secure the left hinge to the system board and the palm-rest and keyboard assembly. 4. Replace the four screws (M2.5x5.5) that secure the right hinge to the system board and the palm-rest and keyboard assembly. 5. Align the screw holes on the display-assembly cable holder with the screw holes on the palm-rest and keyboard assembly. 6. Connect the touchscreen cable and camera cable to the display-assembly cable . 7. Replace the two screws (M1.6x3) that secure the display-assembly cable holder to the palm-rest and keyboard assembly. NOTE: Apply gentle torque when tightening the two screws (M1.6x3) to avoid damaging the screw threads. 8. Align the screw holes on the display-assembly cable bracket with the screw holes on the system board. 9. Tighten the three captive screws that secure the display-assembly cable bracket to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. 38 Removing and installing components