Dell XPS 15 9510 Service Manual - Page 61
System board built-in self-test (M-BIST), Display panel power rail built-in self-test (L-BIST)
View all Dell XPS 15 9510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Table 19. Functions (continued) Trigger M-BIST Press the key and the power button. Indicator of fault Battery LED light with Solid Amber Repair instruction Indicates a problem with the system board. System board built-in self-test (M-BIST) About this task L-BIST Integrated into the single LED error code diagnostics. Automatically initiated during POST. Battery LED error code of [2,8] blinks Amber x2, then pause, then blinks White x8. Indicates a problem with the system board. Steps 1. Press and hold both the M key and the power button to initiate M-BIST. 2. The battery-status light illuminates in amber when there is a failure with the system board. 3. Replace the system board to fix the issue. NOTE: The battery status LED will not illuminate if there is no failure present with the system board. If further troubleshooting is required, proceed with the applicable Guided Resolution for No Power/No POST, etc. Display panel power rail built-in self-test (L-BIST) About this task Next steps L-BIST (LCD Power Rail Test) is an enhancement to the single LED error code diagnostics and is automatically initiated during POST. L-BIST isolates if the LCD is receiving power from the system board. L-BIST checks if the system board is supplying power to the LCD by performing an LCD Power Rail test. If there is no power going to the LCD, the battery status LED flashes a [2,8] LED error code. Troubleshooting 61