Dell XPS 630 Owner's Manual - Page 74

Rebuilding a RAID Configuration, RAID Mode Selection, Mirroring, Striping, Free Disk Selection, Finish - upgrades

Page 74 highlights

5 Under RAID Mode Selection, select Mirroring or Striping from the drop-down menu. 6 Click Next. NOTICE: You will lose all data on the selected drives in the next step. 7 Under Free Disk Selection, select the hard drive(s) you want to include in the (migrated) array by clicking the checkbox beside it. 8 Click Finish. The MediaShield RAID management utility window appears and displays the status of the upgrade/migration process along with any other installed hard drives. NOTE: The time it takes to convert an array depends on several factors, such as the speed of the CPU, the type and size of the hard drive being used, the operating system, etc. Rebuilding a RAID Configuration If one of the hard drives in a RAID array fails, you can rebuild the array by restoring the data to a replacement drive. NOTE: Rebuilding an array can only be performed on RAID 1 configuration. 1 Launch Nvidia MediaShield. 2 Click to select your RAID configuration (Mirroring) in the management utility window. 3 Select Rebuild Array in the System Tasks pane. The NVIDIA Rebuild Array Wizard appears. 4 Click Next. 5 Select the hard drive you want to rebuild by clicking the checkbox beside it. 6 Click Next. 7 Click Finish. The MediaShield RAID management utility window appears and displays the status of the rebuild process. NOTE: You can use your computer while the computer is rebuilding the array. NOTE: You can use any available (RAID-enabled) free disk to rebuild an array. 74 About RAID Configurations

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168

74
About RAID Configurations
5
Under
RAID Mode Selection
, select
Mirroring
or
Striping
from the
drop-down menu.
6
Click
Next
.
NOTICE:
You will lose all data on the selected drives in the next step.
7
Under
Free Disk Selection
, select the hard drive(s) you want to include in
the (migrated) array by clicking the checkbox beside it.
8
Click
Finish
.
The MediaShield RAID management utility window appears and displays
the status of the upgrade/migration process along with any other installed
hard drives.
NOTE:
The time it takes to convert an array depends on several factors, such
as the speed of the CPU, the type and size of the hard drive being used, the
operating system, etc.
Rebuilding a RAID Configuration
If one of the hard drives in a RAID array fails, you can rebuild the array by
restoring the data to a replacement drive.
NOTE:
Rebuilding an array can only be performed on RAID 1 configuration.
1
Launch Nvidia MediaShield.
2
Click to select your RAID configuration (
Mirroring
) in the management
utility window.
3
Select
Rebuild Array
in the
System Tasks
pane.
The
NVIDIA
Rebuild Array Wizard
appears.
4
Click
Next
.
5
Select the hard drive you want to rebuild by clicking the checkbox beside it.
6
Click
Next
.
7
Click
Finish
.
The MediaShield RAID management utility window appears and displays
the status of the rebuild process.
NOTE:
You can use your computer while the computer is rebuilding the array.
NOTE:
You can use any available (RAID-enabled) free disk to rebuild an array.