Dell XPS 630 Owner's Manual - Page 83
Changing Boot Sequence for Future Boots, Boot Device Menu, USB Flash, Device, Boot Sequence - case
UPC - 009463500034
View all Dell XPS 630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
3 When the DELL logo appears, press immediately. NOTE: Keyboard failure may result when a key on the keyboard is held down for an extended period of time. To avoid possible keyboard failure, press and release in even intervals until the Boot Device Menu appears. If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop, then shut down your computer and try again. 4 At the Boot Device Menu, use the up- and down-arrow keys or press the appropriate number on the keyboard to highlight the device that is to be used for the current boot only, and then press . For example, if you are booting to a USB memory key, highlight USB Flash Device and press . NOTE: To boot to a USB device, the device must be bootable. To ensure that your device is bootable, check the device documentation. Changing Boot Sequence for Future Boots 1 Enter system setup (see "Entering System Setup" on page 77). 2 Use the arrow keys to highlight the Boot Sequence menu option and press to access the menu. NOTE: Write down your current boot sequence in case you want to restore it. 3 Press the up- and down-arrow keys to move through the list of devices. 4 Press the spacebar to enable or disable a device. 5 Press plus (+) or minus (-) to move a selected device up or down the list. System Setup 83