Dell XPS 8200 User Manual - Page 51

DC Power Connectors

Get Dell XPS 8200 PDF manuals and user guides View all Dell XPS 8200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

+3.3 VDC -12 VDC 1.0/0.03 0.0 14.04 1.0 12.0 12.0 +5 VFP 0.0 2.0 12.0 When the current load is outside of the ranges listed, but within each specified output current range, the +5-V, +12-V, and +3.3-V outputs are allowed to regulate at +/-10% of nominal DC voltages. 1Maximum continuous total DC output cannot exceed 200 W. Maximum continuous combined load on +5-VDC and +3.3-VDC outputs cannot exceed 135 W. 2Peak +12-VDC output power (up to 12 A) does not exceed 15 seconds in duration. In this condition, the tolerance on the +12-V output is allowed to be +/-10%. 3In system applications where +3.3 VDC is not used, these values may be 0 A without affecting the regulation on the other outputs. 4The required full load combinations are adjusted so that the total output power is less than or equal to 250 W. DC Power Connectors Power Supply DC Connector Pin Assignments DC Power Connector P1 Pin Number Signal name 18-AWG Wire 1 +3.3 VDC Orange 2 +3.3 VDC Orange 3 COM Black

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
DC Power Connectors
Power Supply DC Connector Pin Assignments
DC Power Connector P1
+3.3 VDC
1.0/0.0
3
14.0
4
12.0
–
12 VDC
0.0
1.0
12.0
+5 VFP
0.0
2.0
12.0
When the current load is outside of the ranges listed, but within each specified output current range, the +5-V, +12-V, and +3.3-V outputs are allowed to
regulate at +/
–
10% of nominal DC voltages.
1
Maximum continuous total DC output cannot exceed 200 W. Maximum
continuous combined load on +5-VDC and +3.3-VDC outputs cannot
exceed 135 W.
2
Peak +12-VDC output power (up to 12 A) does not exceed 15 seconds in
duration. In this condition, the tolerance on the +12-V output is allowed to
be +/
–
10%.
3
In system applications where +3.3 VDC is not used, these values may be 0 A
without affecting the regulation on the other outputs.
4
The required full load combinations are adjusted so that the total output
power is less than or equal to 250 W.
Pin Number
Signal name
18-AWG Wire
1
+3.3 VDC
Orange
2
+3.3 VDC
Orange
3
COM
Black