Denon 5805 Owners Manual - English - Page 121

Setting the Delay Time for ZONE2 • This parameter is for optimizing the timing of the sound produced from the various speakers and subwoofer according to the listening position in ZONE2. 1 Press the CURSOR D or H button to select "Delay Time" at the "Zone Setup" menu, then press the ENTER button. • The "Delay Time" screen appears. Advanced Setup - Part 1 4 Press the CURSOR F or G button to set the distance between the center speaker and listening position. Example: When the distance is set to 10.0 feet for the center speaker 2 Press the CURSOR F or G button to select the desired unit, "Meters" or "Feet". • The "Delay Time" screen appears automatically. Example: When "Feet" is selected The distance changes in units of 1 foot or 0.1 foot each time the button is pressed. Select the value closest to the measured distance. When "Step" is selected, you can select the unit of "1 ft (0.1 m)" or "0.1 ft (0.01 m)". When "Default Yes" is selected, then press the CURSOR F button to reset to the default values. The difference of the distances set for the various speakers must be 20.0 ft (6.0 m) or under. If an inappropriate distance is set, "RELOCATE BLINKING SP!" is displayed. In this case, move the relevant speaker to the proper position as indicated by the displayed value. h 5 Press the ENTER button to enter the setting. • The "Zone Setup" menu reappears. The AVR-5805CI automatically sets the optimum surround delay time for the ZONE2 listening room. 3 Press the CURSOR D or H button to select the speaker to be set. 121