Denon 5805 Owners Manual - English - Page 143

Setting the Channel Level

Get Denon 5805 - AVR AV Receiver PDF manuals and user guides
UPC - 081757506342
View all Denon 5805 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 143 highlights

4 Press the CURSOR F or G button to set the distance between the center speaker and listening position. Example: When the distance is set to 10.0 feet for the center speaker The distance changes in units of 1 foot or 0.1 foot each time the button is pressed. Select the value closest to the measured distance. When "Step" is selected, you can select the unit of "1 ft (0.1 m)" or "0.1 ft (0.01 m)". When "Default Yes" is selected, then press the CURSOR F button to reset to the default values. The difference of the distances set for the various speakers must be 20.0 ft (6.0 m) or under. If an inappropriate distance is set, "RELOCATE BLINKING SP!" is displayed. In this case, move the relevant speaker to the proper position as indicated by the displayed value. 5 Press the ENTER button to enter the setting. • The "Speaker Setup" menu reappears. The AVR-5805CI automatically sets the optimum surround delay time for the listening room. Advanced Setup - Part 2 Setting the Channel Level • Use this setting to adjust so that the playback level between the different channels is equal. • From the listening position, listen to the test tones produced from the speakers to adjust the level. • The level of each channel should be adjusted to 75 dB (Cweighted, slow meter mode) on a sound level meter at the listening position. If a sound level meter is not available adjust the channels by ear so the sound levels are the same. Because adjusting the subwoofer level test tone by ear is difficult, use a well known music selection and adjust for natural balance. 1 Press the CURSOR D or H button to select "Channel Level" at the "Speaker Setup" menu, then press the ENTER button. • The "Channel Level" screen appears. 2 Press the CURSOR F or G button to select "Auto" or "Manual". Auto: Adjust the level while listening to the test tones produced automatically from each speaker. Manual: Select the speaker from which you want to produce the test tone to adjust the level. Example: When the "Auto" mode is selected 143

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
143
Advanced Setup – Part 2
4
Press the
CURSOR
F
or
G
button to set the
distance between the center
speaker
and
listening position.
Example:
When the distance is set to 10.0 feet for the
center speaker
The distance changes in units of 1 foot or 0.1 foot each
time the button is pressed. Select the value closest to
the measured distance.
When “Step” is selected, you can select the unit of “1
ft (0.1 m)” or “0.1 ft (0.01 m)”.
When “Default Yes” is selected, then press the
CURSOR
F
button to reset to the default values.
The difference of the distances set for the various
speakers must be 20.0 ft (6.0 m) or under. If an
inappropriate
distance
is
set,
“RELOCATE
BLINKING SP!” is displayed. In this case, move the
relevant speaker to the proper position as
indicated by the displayed value.
5
Press the
ENTER
button to enter the setting.
•
The “Speaker Setup” menu reappears.
The AVR-5805CI automatically sets the optimum
surround delay time for the listening room.
Setting the Channel Level
•
Use this setting to adjust so that the playback level between
the different channels is equal.
•
From the listening position, listen to the test tones produced
from the speakers to adjust the level.
• The level of each channel should be adjusted to 75 dB (C-
weighted, slow meter mode) on a sound level meter at the
listening position.
If a sound level meter is not available adjust the channels by
ear so the sound levels are the same. Because adjusting the
subwoofer level test tone by ear is difficult, use a well
known music selection and adjust for natural balance.
1
Press the
CURSOR
D
or
H
button to select
“Channel Level” at the “Speaker Setup”
menu, then press the
ENTER
button.
•
The “Channel Level” screen appears.
2
Press the
CURSOR
F
or
G
button to select
“Auto” or “Manual”.
Auto:
Adjust the level while listening to the test tones
produced automatically from each speaker.
Example:
When the “Auto” mode is selected
Manual:
Select the speaker from which you want to
produce the test tone to adjust the level.