Denon 5805 Owners Manual - English - Page 152

Advanced Setup - Part 2 5 Press the CURSOR D or H button to select the Equalizer curve, then press the ENTER button. • The "EQ Check" screen appears. 9 The results of the "Auto Setup" procedure can be reset even if the settings have been changed after performing the "Auto Setup" procedure: Press the CURSOR D or H button to select "Restore Yes 0", then press the CURSOR F button. The display is only an approximate picture of the response and that correction is happening at all frequencies. 6 Press the CURSOR F or G button to select the speaker channel. 7 If the check ends, press the CURSOR D or H button to select "Exit", then press the ENTER button. • The "EQ Parameter Check" screen reappears. 10 Press the CURSOR D or H button to select "Exit", then press the ENTER button. • The "Auto Setup / Room EQ" menu reappears. 8 Press the CURSOR D or H button to select "Exit", then press the ENTER button. • The "Parameter Check" screen reappears. 11 Press the CURSOR D or H button to select "Exit", then press the ENTER button. • The "System Setup Menu" reappears. 152