Denon AVR-1513 Owners Manual - Page 43

Basic version Advanced version Information Information on the main unit's various settings (Status) and on input signals (Audio Input Signal) is shown on the display. The information displayed changes each time you press STATUS on the main unit. The information is displayed for several seconds before the display returns to its original condition. GItems to be checkedH POWER • Input source • Surround mode • Input digital terminal QUICK SELECT 1 2 3 4 CBL /SAT DVD MEMORY BAND etc. Blu-ray GAME SHIFT MODE AUX Press INFO on the remote control to display current source name, volume, surround mode name, and other information at the bottom of the screen. TV AUDIO TUNER CHANNEL TUNE CH LEVEL SLEEP DIMMER SEARCH Other settings Switching between PAL and NTSC signal formats Set the video signal format to be output for the TV you are using. • The factory setting is "PAL". SOURCE SELECT 0 STATUS INFO AUDIO Information SOURCE:CBL/SAT MODE :MULTI CH STEREO Master Volume: 0.0 NOTE The information displayed differs according to the input source. ENTER VOLUME BACK SETUP NIGHT RESTORER TONE MUTE SURROUND AUDIO DELAY Dialogue normalization function This function is automatically activated when playing Dolby Digital sources. RC-1170 It automatically corrects the standard signal level for individual program sources. The correction value can be checked using STATUS on the main unit. Offset: - 4dB The figure is the corrected value. This cannot be changed. SOURCE SELECT 1 1 Press and hold STATUS and SOURCE SELECT 0 for at least 3 seconds. "V.Format:" appears on the display. 2 Press SOURCE SELECT 0 1 and set the video signal format. 3 Press STATUS to complete the setting. NOTE When a format other than the video format of the connected TV is set, the picture will not be displayed properly. Information DVD 40