Denon AVR-391 Owners Manual - English - Page 30

Simple version Basic version Playback (Advanced operation) ENGLISH Playback (Basic operation) (vpage 17) Selecting a listening mode (Surround mode) (vpage 21) n Adjusting the volume of the speakers (vpage 27) n Sleep timer function (vpage 28) n Quick select function (vpage 28) n Various memory functions (vpage 28) Convenient functions Adjusting the volume of the speakers You can adjust the channel level either according to the playback sources or to your taste, as described below. n Adjusting the volume of the different speakers 1 Press CH LEVEL. FL :• 0.0dB - n Adjusting the volume of group of speakers (Fader function) This function lets you adjust (fade) the sound all at once from the front (front speaker / center speaker) or rear (surround speaker / surround back speaker). 1 Press CH LEVEL. FL :• 0.0dB - 2 Use ui to select the speaker. The speaker that can be set switches each time one of the buttons is pressed. 3 Use o p to adjust the volume. • In the case of a subwoofer, pressing o when it is at "-12 dB" will change the setting to "OFF". • If no button is operated for about 5 seconds, the display is returned to the normal display. After registering, the display is returned to the normal display. • When a headphone jack is inserted, the headphone channel level can be adjusted. 2 Press u. Front•:-Rear 3 Use o p to adjust the volume of the speakers. (o : front, p: rear) • If no button is operated for about 5 seconds, the display is returned to the normal display. After registering, the display is returned to the normal display. • The fader function does not affect the subwoofer. • The fader can be adjusted until the volume of the speaker is adjusted to the lowest value of -12 dB. Advanced version Information 27