Denon AVR-391 Owners Manual - English - Page 52
Troubleshooting - problem
UPC - 083795001575
View all Denon AVR-391 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
format (producing a digital signal). The number of readings taken in one second is called the "sampling frequency". The larger the value, the closer the reproduced sound is to the original. Speaker impedance This is an AC resistance value, indicated in Ω (ohms). Greater power can be obtained with this value smaller. sYCC601 color Like x.v.Color, each of these color spaces defines a palette of available colors that is larger than the traditional RGB color model. W WMA (Windows Media Audio) This is audio compression technology developed by Microsoft Corporation. WMA data can be encoded using Windows Media® Player Ver.7, 7.1, Windows Media®Player for Windows® XP and Windows Media® Player 9 Series. To encode WMA files, only use applications authorized by Microsoft Corporation. If you use an unauthorized application, the file may not work properly. X x.v.Color This function lets HDTVs display colors more accurately. It enables display with natural, vivid colors. "x.v.Color" is a Sony registered trademark. Explanation of terms ENGLISH Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner's manual? 3. Are the other components operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase. GGeneralH Symptom Power does not turn on. Display is off. Cause/Solution • Check whether the power plug is correctly inserted into the power outlet. • The protection circuit is active. Disconnect the power plug from the electric outlet, wait 5 to 10 seconds and then insert it back into the outlet. • Set "Display" on the menu to something other than "OFF". The power indicator is blinking red in intervals of approximately 2 seconds. • The temperature inside the unit has risen. Please turn off power once, and re-apply the power after the temperature has fallen sufficiently. • Please re-install this unit in a place having good ventilation. The power indicator is blinking red in intervals of approximately 0.5 seconds. • Please use speakers which have the specified impedance. • The speaker cable has shorted (is touching). Firmly twist the core wire in the speaker cable, and then re-connect it to the speaker terminal. After turning on the power, the power indicator is blinking red in intervals of approximately 0.5 seconds. • This unit amplifier circuit has failed. Turn off the power and please contact the DENON service adviser. Set does not operate • Reset the microprocessor. properly. GVideoH Symptom No picture appears. Cause/Solution • Check the TV connection. • Set the TV input correctly. Page 5 4, 48 34 - - 4 4 - 51 Page 5 6 49 Information Advanced version Basic version Simple version