Denon DBP-1611UD Owner's Manual - English - Page 13

ENGLISH Connecting to an AV receiver Connecting to an AV receiver with a digital audio input terminal This connection is recommended when the specifications of an AV Receiver connected to the unit are as follows: • Not supporting HDMI input • Supporting digital audio(coaxial) input This connection enables faithfully playing a disc that supports 5.1-channel output. Cables used for connections Coaxial digital cable (Sold separately) Video cable Audio cable (Black) Video cables (Yellow) Component video cable (Sold separately) (Green) (Blue) (Red) When playing back Dolby Digital Plus/Dolby TrueHD/DTS-HD audio recorded on a BD disc, this unit outputs Dolby Digital or DTS bitstream from its digital audio output terminal. NOTE • Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals are not output with this connection. When outputting Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals, do so with an HDMI connection (vpage 4). • Super Audio CD's DSD signal cannot be output. Also, during CD layer playback, 44.1 kHz/16-bit Linear PCM is output. • Do not output DTS audio signals to an AV receiver that does not support DTS. Playing back a BD/DVD disc with recorded DTS content can generate noise and even damage your speakers. AV Receiver AUDIO IN AUDIO COAXIAL IN VIDEO VIDEO IN COMPONENT VIDEO IN Y PB PR VIDEO IN 10