Denon DN-C635 Operating Instructions - Page 10

ENGLISH 6 ADVANCED CD PLAYBACK (1) Advancing to the next track during playback (Automatic search) 1. Turn the select knob (9) !0 clockwise during playback. • The pickup will advance to the beginning of the next track and playback will continue. Pressing the button several times will forward the pickup to the corresponding number tracks. (2) Returning to the beginning of the current track during playback (Automatic search) 1. Turn the select knob (8) !0 counterclockwise during playback. • The pickup will return to the beginning of the current track and playback will continue. Pressing the button several times will return the pickup to the corresponding number tracks. (3) Audible quick search (Manual search) • Using this function, you can search for a desired point quickly with in a track in the both forward or reverse direction. • Release the SEARCH button (6 or 7) !1 !2 when the desired point has been reached. Normal playback then continues. • When a SEARCH button (6 or 7) !1 !2 is pressed during the pause mode and the button is released, the pause mode is set at that point with the sound being output. 2 Manual search forward 1. Press the SEARCH (7) button !2 during playback. • Playback of the track is sped up. 2 Manual search in reverse 1. Press the SEARCH (6) button !1 during playback. • Reverse playback of the track is sped up. (4) Repeating playback of a desired interval (Single track repeat) 1. Set the play mode to the single play mode. 2. Press the REPEAT button !9. • The "REPEAT 1" indicators light on the display and the single track repeat mode is set. 3. Use the select knob (8 and 9) !0 to select the track to be played repeatedly. 4. Press the PLAY (1) button y. • Playback starts. • Once the selected track ends, it is played again from the beginning. • The single track repeat mode can also be set by pressing the REPEAT button !9 during playback. The current track is played repeatedly. • To cancel the single track repeat mode, press the REPEAT button !9 repeatedly until the "REPEAT 1" indicator turns off. (All track repeat) 1. Set the play mode to the continuous play mode. 2. Press the REPEAT button !9. • The "REPEAT" indicators light on the display and the all track repeat mode is set. 3. Press the PLAY (1) button y. • The disc is played repeatedly. • The all track repeat mode can also be set by pressing the REPEAT button !9 during playback. • If the REPEAT button !9 is pressed during programmed playback, the tracks are played repeatedly in the programmed order. • To cancel the all track repeat mode, press the REPEAT button !9 repeatedly until the "REPEAT" indicator turns off. (5) To play the set section repeatedly (A-B repeat) 1. During playback, press the A-B button @3 at the point where you want to start repeated playback (A point). • The "A-B" indicator flash on the display. 2. Press the A-B button @3 again at the point where you want to end repeated playback (B point). • The "A-B" indicator stops flashing (remaining lit), and the A-B section begins playing repeatedly. • If no B point it set, the end of the current track is set as the B point when in the single mode, and the end of the disc is set as the B point when in the "continue" mode. 3. To cancel A-B repeat playback, press the A-B button @3 again. NOTE: • Set the A and B points at least 1 second apart from each other. 10 (6) Playing specific tracks in a specific order (Programmed play) • With this function, you can choose any of the tracks on the disc and program them to play in any order. • Up to 99 tracks can be programmed. 2 Inputting the program 1. Press the PROGRAM IN button !8. • "PROG" indicator flashes, and "---Select?" appears on the display. 2. Turn the select knob !0 to select the track. 3. Press the select knob !0 to enter the track. • To enter the next track, press the select knob !0 again. • Repeat steps 2 and 3 to program the tracks in the desired order. 4. Press the PROGRAM IN button !8 to exit the program input mode. • "PROG" indicator lights, and set the return to the normal mode. 2 Changing the program 1. Press the PROGRAM IN button !8 to set the program edit mode. • "PROG" indicator flashes. 2. Turn the select knob !0 to select the program step. 3. Press the select knob !0 to be edited. 4. Turn the select knob !0 to change the track. 5. Press the select knob !0 to enter the track. • To edit the next track, press the select knob !0 again. • Repeat steps 2, 3, 4, and 5 to change the tracks. 6. Press the PROGRAM IN button !8 to exit the program edit mode. 2 Inserting the program 1. Press the PROGRAM IN button !8 to set the program edit mode. • "PROG" indicator flashes. 2. Turn the select knob !0 to select the position at which to insert a track. 3. Press the SEARCH (7) button !2 to set the program insert mode. 4. Turn the select knob !0 to insert the track. 5. Press the select knob !0 to enter the track. • The track corresponding to that number is inserted in the program before the track of step 2. • To insert more tracks, press the select knob !0 again. • Repeat steps 2, 3, 4, and 5 to insert the tracks. 6. Press the PROGRAM IN button !8 to exit the program edit mode. 2 Deleting the program 1. Press the PROGRAM IN button !8 to set the program edit mode. • "PROG" indicator flashes. 2. Turn the select knob !0 to select the position at which to delete a track. 3. Press the SEARCH (6) button !1 to delete the track. • Repeat steps 2 and 3 to delete more tracks. 4. Press the PROGRAM IN button !8 to exit the program edit mode. 2 Playing the programs 1. Press the PROG. PLAY button !7 to set the program play mode. • The program play mode LED is lit. • The first track in the program is cued and the standby mode is set. 2. Press the PLAY (1) button y. • Programmed playback starts. 2 Clearing the program 1. The program is also cleared when the OPEN/CLOSE button e is pressed. 2 Presetting program • Programs can be stored in the preset memory. When a disc for which a program is preset is loaded, the programmed playback mode is set automatically. • Programs can be stored for up to three discs. 1. Follow the instructions under "Programming" to input the program. 2. Follow the instructions under "(2) Presetting Procedure" to set the preset mode. (See Page 15.) 3. Turn the select knob !0 to select "02:Prg1" (or "03:Prg2" or "04:Prg3"). 4. Press the select knob !0. • The character display changes as follows : [Before change] [After change] Prg1 OFF ⇒ Prg1 ON Prg2 OFF ⇒ Prg2 ON Prg3 OFF ⇒ Prg3 ON 5. Press the STOP (2) button u. • The preset setting mode is canceled and the set return to the normal mode. • To play a preset disc : Load a disc for which a program is preset. 6. Press the PLAY (1) button y. NOTE: • Programming is not possible with the disc holder open.