Denon DVD-A1UDCI Owners Manual - English - Page 20

Getting Started Connections Setup Playback HDMI Control Function Information Troubleshooting Specifications ENGLISH Connection to an AV Amp with No HDMI Audio Input When playing back Dolby Digital Plus/Dolby TrueHD/DTS-HD audio recorded on a BD disc, the DVDA1UDCI outputs Dolby Digital or DTS bitstream from its digital audio output terminal. AV Amp "6%*0 $0"9*"- */ 015*$"*/ NOTE • Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals are not output with this connection. When outputting Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals, do so with an HDMI connection (vpage 13, "Using an HDMI Cable to Connect to an AV Amp or Television"). • Super Audio CD's DSD signal cannot be output. Also, during CD layer playback, 44.1 kHz/16-bit Linear PCM is output. Match the shapes • Do not output DTS audio signals to an AV Amp that does not support DTS. Playing back a BD/DVD disc with recorded DTS content can generate noise and even damage your speakers. • When connecting with an optical transmission cable (sold separately), make sure the plug shape aligns with the socket, and insert fully. 1. Home Theater Playback - Playing Back Using Multi-channel System - Audio Signal from the Digital Audio Output (Optical/Coaxial) Terminal The DVD-A1UDCI can convert and output digital audio signal format recorded on media. Convert the digital audio signal in accordance with the specifications of the device that is to input digital audio output signals from the DVD-A1UDCI. Media/Files Audio format Dolby Digital Dolby Digital Plus Dolby TrueHD BD DTS DTS-HD LPCM AVCHD Dolby Digital LPCM Dolby Digital DVD-Video DTS LPCM DVD-Audio LPCM, PPCM Multi area Super Audio CD Stereo area CD layer DivX® Dolby Digital MP3, MP2 CD MP3, WMA, AAC, LPCM DTS-CD Setting "Audio Setup" - "Digital Out" (vpage 29) on the GUI menu Bitstream PCM/PCM Down Sampling Dolby Digitalz1 DTSz1 2 ch Downmix LPCMz1 Dolby Digital 2 ch Downmix LPCM Dolby Digital DTS 2 ch Downmix LPCM 2 ch Downmix LPCM Audio is not output 2 ch LPCM Dolby Digital 2 ch Downmix LPCM 2 ch LPCM DTS 2 ch Downmix LPCM (DTSz2) z1 : Bitstream signals are output in accordance with the BD re-encode setting when "BD Audio Mode" is set to "Mix Audio Output" (vpage 33). z2 : When "HDMI Setup" - "Audio Setup" is set to "Auto" on the GUI menu and bit stream is output from HDMI , the DTS bit stream is output from the digital audio output (optical/coaxial) as well. For content with copyright protection, audio signal is down sampled to 48kHz 16bit and is output. 17