Denon DVD-A1UDCI Owners Manual - English - Page 24

Getting Started Connections Setup Playback HDMI Control Function Information Troubleshooting Specifications ENGLISH 5. Using BD-LIVE function or updating the software version of DVD-A1UDCI Connecting to the Network • You can use a disc which offers BD-LIVE function by connecting the unit to the Internet (vpage 38). • You can update by downloading the latest firmware from the Internet. For more information, on the GUI menu, select "Other Setup" - "Firmware Update" (vpage 33). • See "Network Setup" (vpage 31) on the GUI menu for more information on network setting. Internet Computer Router Modem To WAN port To LAN port To LAN port LAN port/ Ethernet connector ETHERNET connector System Requirement n Internet Connection by Broadband Circuit n Modem Device that connects to the broadband circuit and conducts communications on the Internet. A type that is integrated with a router is also available. n Router When using the DVD-A1UDCI, we recommend a router with the following features. • Built-in DHCP (Dynamic Host Configuration Protocol) server. Function that automatically assigns an IP address on the LAN. • Built-in 100BASE-TX switch (built-in switching hub compatible with speeds upwards of 100 Mbps) n Ethernet cable (CAT-5 or greater recommended) • An Ethernet cable is not included with the DVD-A1UDCI. • For Ethernet cable, we recommend you use shielded straight cable (normal type). If you use the flat type or a non-shielded cable, the noise may adversely affect other devices. For Internet connection, use an ISP (Internet Service Provider). Ask your local dealer for details. NOTE • It is necessary to subscribe to an ISP in order to connect to the Internet. If you already have a broadband connection, there is no need to subscribe anew. • The router you can use varies with the ISP. For more information, contact your ISP or PC dealer. • D ENON assumes no responsibility whatsoever for any communication errors or troubles resulting from customer's network environment or connected devices. n Others • The DVD-A1UDCI can use the DHCP function to automatically set the network. • With the type of circuit in which network setting is performed manually, when subscribed to a provider, conduct the setting in accordance with "Network Setup" on the GUI menu (vpage 31). • If you connect the DVD-A1UDCI to a network without a DHCP function, conduct IP address and other settings according to "Network Setup" on the GUI menu (vpage 31). • The DVD-A1UDCI does not support PPPoE. If you subscribe to a circuit that is set with PPPoE, a PPPoE- compatible router is required. • When setting manually, check the setting contents with the network administrator. 21