Dewalt DCMWSP650Y2 Instructional Manual - Type 1 - Page 20
LED Dashboard Indicators Fig. A, U, Safety Key Fig. T
![]() |
View all Dewalt DCMWSP650Y2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
English Safety Key (Fig. T) DANGER: Sharp moving blade. In order to prevent accidental start-up or unauthorized use of your cordless mower, a removable safety key has been incorporated into the design of your mower. The mower will be completely disabled when the safety key has been removed from the mower. DANGER: Rotating blades can cause serious injury. To prevent serious injury, turn unit off and remove safety key and battery pack when unattended, or when charging, cleaning, servicing, transporting, lifting, or storing mower. 1. Insert safety key 6 into the key slot 50 , located on the main handle 4 , until it is fully seated inside of the key slot 50 as shown in Fig. T. 2. The mower is now operational. LED Dashboard Indicators (Fig. A, U) The LED dashboard 12 contains the state of charge indicator, load meter indicator, temperature indicator, handle folding indicator, blade sharpening indicator and reset button. State of Charge Indicator (Fig. U) LEVEL OF CHARGE 25% - 50% CHARGE INDICATOR LED COLOR White ≤25% White Low battery shutdown White and blinking Handle Folding Indicator (Fig. U) The handle folding indicator 15 will illuminate when the single touch handle 1 is not engaged in the operating position when the safety key 6 and battery pack 26 are installed, and the bail handle 8 is pulled. To clear the handle folding indicator 15 , refer to the Raise the Single Touch Handle section in this manual. Cutting Load Meter Indicator (Fig. U) The DCMWP600 and DCMWSP650 are equipped with a state of charge indicator. This will display the current level of charge in the battery during use. It does not indicate tool functionality and is subject to variation based on product components, temperature and end-user application. • The state of charge indicator LEDs 18 will illuminate, indicating the percent of charge in the battery. • When all 5 state of charge indicator LEDs 18 illuminate, the battery is fully charged. • When one state of charge indicator LED 18 illuminates, charge is low and then it will flash when the battery is discharged. Remove the battery and charge it. State of Charge Indicator LED Status LEVEL OF CHARGE CHARGE INDICATOR LED COLOR 100% - 85% White 70% - 85% White The cutting load meter indicator 14 will illuminate white, yellow or red when mowing. • White indicates a low cutting load. • Yellow indicates a medium cutting load. • Red indicates a high cutting load. Runtime will be reduced if there is a prolonged high load while mowing. Overheat Indicator (Fig. U) • The overheat indicator 13 will illuminate amber and then blink when the battery or motor is overloaded during operation. • The overheat indicator 13 will illuminate red and then blink when the module has reached a high temperature. • To clear the overheat indicator 13 , allow the battery and mower to cool down. When cooled, restart the mower and resume cutting with the mower deck set higher. Blade Sharpening Indicator (Fig. U) 50% - 70% White The blade sharpening indicator 16 will illuminate when the blades need service. Sharpen or replace the blades, refer to the Blade Sharpening section in this manual. 18
![](/manual_guide/products/dewalt-dcmwsp650y2-instructional-manual-type-1-f2b46d2/20.png)