Dewalt DWV010 Instruction Manual - Page 13

Problem, Solution, Specifications, Dwv010

Get Dewalt DWV010 PDF manuals and user guides View all Dewalt DWV010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

English PROBLEM SOLUTION Vacuum stops running Thermal overload has been tripped: 1. Turn the vacuum off and disconnect vacuum cleaner from power source. 2. Empty the canister, if needed. 3. Allow the unit to cool. 4. Plug the power cord into an appropriate outlet and turn on/off switch to the ON position ( ) to test. If vacuum will not restart call 1-800-4-DEWALT (1-800- 433-9258). Dust comes out while Check for proper installation of the filters. vacuuming Ensure filters are not damaged; replace if necessary. Ensure filter seals are in place and are secure. Automatic filter cleaning is not working Power tool does not turn on the dust extractor. Listen for the solenoid clicking to ensure the filter cleaning mechanism is working. Ensure tool is plugged into the tool outlet on the dust extractor. Ensure the on/off switch is in the ON position ( ). Ensure the tool control switch is in the ON position ( ). SPECIFICATIONS DWV010 Volts 120 V ~ Hertz 60 Rated Current 15 A per UL1017 Nominal Motor Current 11.8 A Capacity 8 gallon (30.2 liters) Weight 21 lbs. (9.5 kg) 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
11
English
PROBLEM
SOLUTION
Vacuum stops running
Thermal overload has been tripped:
1. Turn the vacuum off and disconnect
vacuum cleaner from power source.
2. Empty the canister, if needed.
3. Allow the unit to cool.
4. Plug the power cord into an appropriate
outlet and turn on/off switch to the ON
position (
) to test. If vacuum will not
restart call 1-800-4-D
E
WALT (1-800-
433-9258).
Dust comes out while
vacuuming
Check for proper installation of the filters.
Ensure filters are not damaged; replace if
necessary.
Ensure filter seals are in place and are
secure.
Automatic filter
cleaning is not
working
Listen for the solenoid clicking to ensure
the filter cleaning mechanism is working.
Power tool does
not turn on the dust
extractor.
Ensure tool is plugged into the tool outlet
on the dust extractor.
Ensure the on/off switch is in the ON
position (
).
Ensure the tool control switch is in the ON
position (
).
SPECIFICATIONS
DWV010
Volts
120 V ~
Hertz
60
Rated Current
15 A per UL1017
Nominal Motor Current
11.8 A
Capacity
8 gallon (30.2 liters)
Weight
21 lbs. (9.5 kg)