Dewalt DWV010 Instruction Manual - Page 6

English FIG. 1 BA C EML J D H O N G K F overheating. DEWALT tools are factory tested; if this tool does not operate, check power supply. NOTICE: DO NOT operate this tool on D.C. current. Tool damage may occur. SAVE THESE INSTRUCTIONS COMPONENTS (FIG. 1) WARNING: Never modify the power tool or any part of it. Damage or personal injury could result. A. Top handle/cord wrap I. HEPA Filters B. Power cord J. Threaded hose inlet C. Vacuum head K. Hose strap D. Canister latch L. Tool control switch E. On/off switch M. Outlet for power tools F. Canister N. Bag G. Anti-static suction hose O. Airlock connector H. Casters ANTI-STATIC HOSE The DWV010 is equipped with an anti-static grounding system including an anti-static hose which will prevent static shocks caused by vacuuming dry debris. INTENDED USE This vacuum is used for fine particulate pick-up, like wallboard, concrete, wood or surface dust. DO NOT use in rain or in presence of flammable liquids or gases. These heavy-duty vacuums are for professional use. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool. NOTE: This vacuum is intended for commercial use. ASSEMBLY (FIG. 1-4) WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury. WARNING: When using electric appliances, always follow basic safety precautions to reduce the risk of fire, electric shock and personal injury. 4