Dewalt DWV010 Instruction Manual - Page 8

Accessories, Automatic Filter Cleaning System, Filter, Wet Pick Up Applications Fig. 1, 7 - hose

Get Dewalt DWV010 PDF manuals and user guides View all Dewalt DWV010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

FIG. 6 O P a. Ensure the collar on the AirLock connector is in the unlock position. (Refer to Figure 6.) Align notches (Q) on collar and AirLock connector as shown for unlock and lock positions. b. Push the AirLock connector onto the adapter connector English point. c. Rotate the collar to the locked position. NOTE: The ball bearings inside collar lock into slot and secure the connection.The power tool is now securely connected to Q Q the dust extractor. AUTOMATIC FILTER CLEANING SYSTEM This vacuum has a highly effective filter cleaning system which minimizes filter clogging. Every 30 seconds, one of the two filters gets automatically cleaned. The cleaning process alternates between the filters and continues through the life of the unit. NOTE: It is normal to hear a clicking sound during this process. NOTE: After many hours of operation the automatic filter cleaning system may not be effective. When this happens the filters will need 5. Choose the correct power tool adaptor (P) to fit the power tool connection on the tool to be used, refer to Accessories under Maintenance. Attach power tool adaptor (P) to power tool. 6. Your DEWALT construction dust extractor is fitted with the DEWALT AirLock connection system. The AirLock allows for a fast, secure connection between the suction hose (G) and power tool. The AirLock connector (O) connects directly to DEWALT compatable tools or through the use of an AirLock adapter (available from your local DEWALT supplier). Refer to the Accessories section for detail on available adapters. to be cleaned or replaced. Refer to Filter under Maintenance. WET PICK UP APPLICATIONS (FIG. 1, 7) WARNING: DO NOT connect power tools to outlet (M) when using the vacuum for wet pick up. WARNING: Plug vacuum into GFCI protected outlet when using the vacuum for wet pick up. FIG. 7 NOTICE: DO NOT remove ball float (R), doing so will cause damage to the vacuum. The ball float keeps water from entering the motor. Note: If using an adapter ensure it is firmly attached to the tool Before using the vacuum for wet pick up: outlet before following the steps below. • Ensure the canister is empty and free of excessive dust. • Remove filters (I). R • Plug vacuum into a GFCI protected outlet. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
6
English
FIG. 6
Q
O
P
Q
5. Choose the correct power tool adaptor (P) to fit the power tool
connection on the tool to be used, refer to
Accessories
under
Maintenance.
Attach power tool adaptor (P) to power tool.
6. Your D
E
WALT construction dust extractor is fitted with the
D
E
WALT AirLock connection system. The AirLock allows for
a fast, secure connection between the suction hose  (G) and
power tool. The AirLock connector (O) connects directly to
D
E
WALT compatable tools or through the use of an AirLock
adapter (available from your local D
E
WALT supplier). Refer to the
Accessories
section for detail on available adapters.
Note:
If using an adapter ensure it is firmly attached to the tool
outlet before following the steps below.
a.
Ensure the collar on the AirLock connector is in the unlock
position. (Refer to Figure 6.) Align notches (Q) on collar and
AirLock connector as shown for unlock and lock positions.
b.
Push the AirLock connector onto the adapter connector
point.
c.
Rotate the collar to the locked position.
NOTE:
The ball bearings inside collar lock into slot and secure
the connection.The power tool is now securely connected to
the dust extractor.
AUTOMATIC FILTER CLEANING SYSTEM
This vacuum has a highly effective filter cleaning system which
minimizes filter clogging. Every 30 seconds, one of the two
filters gets automatically cleaned. The cleaning process alternates
between the filters and continues through the life of the unit.
NOTE:
It is normal to hear a clicking sound during this process.
NOTE:
After many hours of operation the automatic filter cleaning
system may not be effective. When this happens the filters will need
to be cleaned or replaced. Refer to
Filter
under
Maintenance
.
WET PICK UP APPLICATIONS (FIG. 1, 7)
WARNING:
DO NOT connect power tools to outlet (M) when
using the vacuum for wet pick up.
WARNING:
Plug vacuum into GFCI protected outlet when using
the vacuum for wet pick up.
NOTICE:
DO NOT remove ball float (R),
doing so will cause damage to the vacuum.
The ball float keeps water from entering the
motor.
Before using the vacuum for wet pick up:
• Ensure the canister is empty and free
of excessive dust.
• Remove filters (I).
• Plug vacuum into a GFCI protected
outlet.
FIG. 7
R