Dymo 1750630 User Guide - Page 31
Getting Help, Troubleshooting, Status Lights, Restoring the Print Server to the Factory Default - manual
View all Dymo 1750630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 5 Getting Help Your LabelWriter Print Server should offer years of trouble-free service with very little maintenance. However, in the event that you encounter a problem, this chapter offers suggestions for resolving problems that can occur when using the print server. If you are unable to solve a problem, this chapter also describes how to contact DYMO Technical Support. Troubleshooting This section provides information on how to detect and correct problems you might encounter while using your print server. Status Lights The status lights visually show the current state of the print server. POWER LINK ACTIVE USB Power Link Active USB Solid - power is connected. Off - no power is connected. Solid - server is connected to the network. Off - no Ethernet connection. Flashing - the network is active. Solid- printer is connected to the server. Flashing - USB error. Off - printer is not connected. Restoring the Print Server to the Factory Default Settings You can restore the print server to the factory default settings either from the Print Server Web pages or manually from the print server. To restore the print server from the Web pages 1 Click Open Print Server Home Page (Windows) or the Control Center toolbar. Go to Home Page (Mac OS) on 2 Click Configuration at the top of the page. 3 Enter your administrator name and password, and then click Login. 4 Click Maintenance on the left side of the page. 5 Click Reset to Factory Default. 6 Click Yes when prompted to load the factory default settings. 27