Dymo 1750630 User Guide - Page 32
Limited Warranty, Obtaining Technical Support, Init/Reset, Power
View all Dymo 1750630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Getting Help When the Print Server home page appears, the print server has been restored to the factory default settings. To restore the print server manually 1 Unplug the print server power adapter. 2 Press and hold the Init/Reset button on the side of the print server and plug in the print server power adapter. 3 Continue to hold the Init/Reset button until the Power and USB status lights flash. 4 Unplug the print server power adapter, and then plug the print server power adapter in again. The print server is now restored to the factory default settings. Limited Warranty Your DYMO® LabelWriter® Print Server comes with a warranty against defects in materials, design, or workmanship, for two years from the original date of purchase, when used in accordance with all operating instructions. Normal wear and tear is not covered, nor is excessive use, abuse or damage caused by a user either intentionally or accidentally. EXCEPT AS PROVIDED HEREIN, SANFORD MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, AND SANFORD SPECIFICALLY EXCLUDES WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SANFORD'S LIABILITY UNDER THIS WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE PRINT SERVER. SANFORD SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER OR NOT FORESEEABLE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE AND COUNTRY TO COUNTRY. Obtaining Technical Support If you experience problems with the setup or use of your print server, carefully read this manual to make sure you have not missed something that is covered in the documentation. If you cannot resolve your problem by consulting the documentation, you can obtain additional information and assistance from DYMO. DYMO maintains an Internet Web site at www.dymo.com that includes the latest support information for your LabelWriter Print Server. You can also contact DYMO Technical Support by phone or fax from 9 am to 8 pm, Eastern time. Phone: (203) 588-2500 Fax: (203) 588-2560 or (203) 355-7060 Visit the Support area of our Web site at www.dymo.com to contact us by email. 28