Dymo Rhino 5200 Hard case Kit by DYMO User Guide - Page 3
About Your New Printer, Getting Started - labels
View all Dymo Rhino 5200 Hard case Kit by DYMO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
About Your New Printer GB With your new DYMO RhinoPRO™ 5000 printer, you can create a wide variety of high-quality, self- adhesive labels. You can choose to print your labels in many different sizes and styles. The Press thumb latch printer uses DYMO RhinoPRO Industrial label cassettes in widths of 6 mm (1/4"), 9 mm (3/8"), Figure 1 12 mm (1/2"), or 19 mm (3/4"). RhinoPRO label cassettes are also available in a wide range of materials. Visit www.dymo.com for information on obtaining 2. Insert the batteries following the polarity markings (+ and -). 3. Close the battery compartment door. tapes and accessories for your printer. Remove the batteries if the printer will not be pe Warranty Registration used for a long period of time. Please complete the warranty registration card and Using the Battery Pack return it to the appropriate address, or you can An optional, rechargeable battery pack can be register online at www.dymo.com. used to power the printer. The battery pack can be purchased through your local DYMO reseller. Getting Started The printer must be connected to external power Follow the instructions in this section to print your first label. through the AC adapter and turned ON to charge the battery pack. When the battery pack is completely discharged, allow four to five hours to Power Supply fully charge the battery. The printer is powered by standard batteries, a rechargeable battery pack or an AC power adapter. To save power, the printer will automatically turn off after five minutes of inactivity. Inserting the Batteries When connected to external power, the battery charging indicator may continue to display even though the battery pack is fully charged. To use the battery pack 1. Open the battery compartment door. 2. Insert the battery pack following the polarity The printer uses six AA batteries. markings (+ and -). See Figure 2. To insert the batteries 1. Press the thumb latch on the bottom of the printer to open the battery compartment door. See Figure 1. Figure 2 2 Manual_RhinoPRO5000_WEU.indd 3 33 23-07-2004 10:51:10