Dymo Rhino 5200 Hard case Kit by DYMO User Guide - Page 6

Function Key The Function key is used to select the function or symbol printed above a key. For example, when 2 you press , the Font size menu appears in the 2 display; however, if you press + together, the Language menu appears. Backspace Key 0 The Backspace key removes the character to the 0 left of the cursor. Pressing + clears all the current label text. Text size and other settings remain unchanged. Escape Key The Escape key returns you to the starting point from within any function. Navigation Key You review and edit your label using the arrows on the Navigation key. You can also view menu choices, and then press to make a selection. Designing Your Label You can choose from a number of formatting options to enhance the appearance of your labels. Changing the Font Size You can print the text on your label in five font sizes: extra-small, small, medium, large, and extralarge. XS S M L XL The font size you can use depends on the size of label tape that is installed in the printer. To set the font size 1. Press 2. 2. Select a font size and press . Creating Multi-Line Labels You can create multi-line labels depending upon the size of the label tape, as follows: Tape Size Number of Lines 6 mm (1/4") 1 9 mm (3/8") 2 12 mm (1/2") 2 19 mm (3/4") 4 To create a multi-line label 1. Type the text for the first line, and press . 2. Type the text for the next line. 3. Repeat these steps for each additional line. Adding Symbols The printer supports the extended symbol set as shown in Figure 8. , ( ) ; ' " \ ~ ² ° & ? �� � � � � _ @± Figure 8 To add a symbol V 1. Press + . The first row of symbols shown in Figure 8 is displayed. 2. Use the arrow keys to move to the desired symbol. You can move horizontally and vertically through the rows of symbols. 3. When you locate the symbol, press to add the symbol to your label. 66 Manual_RhinoPRO5000_WEU.indd 6 23-07-2004 10:51:26