Dymo Rhino 5200 Hard case Kit by DYMO User Guide - Page 9

Printing Options

Get Dymo Rhino 5200 Hard case Kit by DYMO PDF manuals and user guides View all Dymo Rhino 5200 Hard case Kit by DYMO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

The default value is 17.5 mm (0.7") and can be set in increments of 0.1 mm (0.005"). 3. Enter the total number of module blocks on one row and press . 4. Enter the size for each component (X=?) and press after each module. G 5. Enter text for the first module and press . 6. Press +0 to clear the text. 7. Repeat steps 5 and 6 until all module labels are printed. 8. Press + to feed the tape after the last module and then cut the label using the Cutter lever. Printing Vertical Labels Single-line labels can be printed with the text running vertically. To print vertically 1. Press . 2. Enter the text for your label and press G. Printing Barcode Labels The printer can generate two types of barcodes: CODE-39 and CODE-128. You can only print a barcode on 19 mm (3/4") label tape. The barcode prints horizontally along the label with the text in small print underneath the barcode. You can optionally add text before and after the barcode. Or, you can add text above and below the barcode by creating a multi-line label. See Creating Multi-Line Labels on page 6. To create a barcode 1. Enter the text you wish to appear before the barcode on the label. (Optional) 2. Press + . 3. Select CODE-39 or CODE-128, and press . 4. Enter the text for the barcode between the barcode symbols ( ) and press . 5. Enter any text you wish to appear after the barcode. (Optional) 6. Press G. Printing Options You can choose to print multiple copies of the same label, print serialized labels, or print a combination of both. Printing Multiple Copies You can print up to 99 copies of the same label at one time. When printing multiple copies, a dotted cut-line is printed between each label. To print multiple copies 1. Press +G. ; 2. Press the arrow to increase the number of copies to print. The default is 2 copies. : 3. Press the arrow to decrease the number of copies (maximum is 99). G 4. Press or to begin printing. You may notice a brief pause in printing between each label for more complex formats. When printing is finished, the number of copies to print returns to 2. Advancing the Label Tape The default leader space for all labels is approximately 10 mm (0,4"). To add additional blank space to the beginning or end of your label, you can feed the tape in 6 mm (0.25") increments. ➤ Press + . 99 Manual_RhinoPRO5000_WEU.indd 9 23-07-2004 10:51:38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
9
The default value is 17.5 mm (0.7”) and can be
set in increments of 0.1 mm (0.005”).
3. Enter the total number of module blocks on one
row and press
4. Enter the size for each component (X=?) and
press
after each module.
5. Enter text for the first module and press
G
.
6.
Press
+
0
to clear the text.
7. Repeat steps 5 and 6 until all module labels are
printed.
8. Press
+
to feed the tape after the last
module and then cut the label using the Cutter
lever.
Printing Vertical Labels
Single-line labels can be printed with
the text running vertically.
To print vertically
1. Press
.
2. Enter the text for your label and
press
G
.
Printing Barcode Labels
The printer can generate two types of barcodes:
CODE-39 and CODE-128. You can only print a
barcode on 19 mm (3/4”) label tape.
The barcode prints horizontally along the label with
the text in small print underneath the barcode. You
can optionally add text before and after the
barcode. Or, you can add text above and below the
barcode by creating a multi-line label. See
Creating Multi-Line Labels
on page 6.
To create a barcode
1. Enter the text you wish to appear before the
barcode on the label. (Optional)
2. Press
+
.
3. Select
CODE-39
or
CODE-128
, and press
.
4. Enter the text for the barcode between the
barcode symbols (
) and press
5. Enter any text you wish to appear after the
barcode. (Optional)
6. Press
G
.
Printing Options
You can choose to print multiple copies of the same
label, print serialized labels, or print a combination
of both.
Printing Multiple Copies
You can print up to 99 copies of the same label at
one time. When printing multiple copies, a dotted
cut-line is printed between each label.
To print multiple copies
1. Press
+
G
.
2. Press the
;
arrow to increase the number of
copies to print. The default is 2 copies.
3. Press the
:
arrow to decrease the number of
copies (maximum is 99).
4. Press
or
G
to begin printing.
You may notice a brief pause in printing
between each label for more complex formats.
When printing is finished, the number of copies to
print returns to 2.
Advancing the Label Tape
The default leader space for all labels is
approximately 10 mm (0,4”). To add additional
blank space to the beginning or end of your label,
you can feed the tape in 6 mm (0.25”) increments.
➤
Press
+
.
Manual_RhinoPRO5000_WEU.indd
9
23-07-2004
10:51:38