Dynex DX-19L150A11 User Manual (English) - Page 30

Adjusting menu settings DX-15L150A11/DX19L150A11/DX-22L150A11 27 Labeling an input source You can add a label to an input source to make it easier to identify. To label an input source: 1 Press MENU. The on-screen menu opens. Restoring default settings Caution: When you restore default settings, all the settings (except the password and parental rating) you have customized are reset. To restore default settings: 1 Press MENU. The on-screen menu opens. 2 Press or to highlight SETTINGS. The SETTINGS menu opens. 2 Press or to highlight SETTINGS. The SETTINGS menu opens. 3 Press or to highlight Input Labels, then press ENTER or . The Input Labels screen opens. 3 Press or to highlight Reset to Default (you may need to scroll down to find it), then press ENTER. A confirmation box opens. 4 Press or to select Yes, then press ENTER to confirm. 5 Press MENU to return to the previous menu, or press EXIT to close the menu. 4 Press or to select the input for which you want to change the label, then press to move to the label selection field. 5 Press or to select the label you want, then press ENTER to confirm the change. 6 Press or to select Yes or No, then press ENTER to confirm. 7 To change another label, press to move to the label selection field, then repeat Steps 4 through 6. 8 Press MENU to return to the previous menu, or press EXIT to close the menu. The next time you press the INPUT button on the remote control, you will see your new label in the INPUT SOURCE menu.