Dynex DX-ECDRW200 User Manual (English) - Page 7
Installing your external drive
View all Dynex DX-ECDRW200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Installing your external drive 7 The advantages of this method are reduced load on system resources and the elimination of buffer underrun errors. However, this method cannot be utilized for audio data. Several formats, such as UDF and CD-R FS, can be used while recording using the Packet Write method. Installing your external drive System requirements • Intel® Pentium® III 800 MHz or higher CPU • Microsoft® Windows® XP/2000 operating system • 256 MB memory (recommended) • CD drive (minimum 16× drive recommended) • USB 2.0 host controller card (not required if your system board is equipped with a USB 2.0 controller) • USB 2.0 certified cable (included) • Software (the drive requires CD writing software to write onto a CD-R/RW. When you use the CD writing software, make sure that it supports this drive.) • Hard drive space-when writing to a CD-R/RW, you will need a working area (50 to 100 MB free) on the hard drive. When creating an image file for data to write to a CD-R/RW disc, in addition to the working area you will need as much hard drive space as the data will occupy on the CD (up to 800 MB). However, the hard drive space is not needed for the image file when you are writing directly from a hard drive or CD drive.