Dynex DX-UPDVD2 User Manual (English) - Page 10

8 DX-UPDVD2 Using your DVD player Composite connection TV Composite cable (included) A/V cable connectors are color-coded. Connect yellow (video) to yellow, red (audio right) to red, and white (audio left) to white. DVD player Using your DVD player Turning your player on and off To turn your player on and off: 1 Plug the power cord into an AC power outlet. 2 Press the /STANDBY button to turn on your player. 3 Press the /STANDBY button again to turn off your player. Playing a disc To play a disc: 1 Turn on your player and your TV. 2 Press /OPEN/CLOSE to open the disc tray. 3 Load the disc into the tray, with the label side up. 4 Press /OPEN/CLOSE to close the tray. Playback starts automatically. If playback does not start, press on the remote control or the player to start the playback. • To stop the playback, press . The player notes the stopped point, depending on the disc. • Press to resume playback (from the stopped point). To start playback from the beginning of the disc, press again, then press . Your player starts playback at the beginning of the disc. • During playback, press to fast forward through the disc. Each time the button is pressed, the fast forward motion speed changes. Press to resume normal playback. • During playback, press to fast reverse through the disc. Each time the button is pressed, the fast reverse motion speed changes. Press to resume normal playback. • During playback, press to return to the start of the previous chapter. Each time you press this key you can skip a chapter, back to the start of the disc. • During playback, press to skip the current chapter and play the next chapter. • During playback, press repeatedly to step forward frame by frame in the video. Press to resume normal playback. 5 Press /OPEN/CLOSE to open the tray, then remove the disc. 6 Press /OPEN/CLOSE to close the disc tray, or press /STANDBY. The disc tray closes automatically and the player turns off. Note: The symbol may appear on your TV display during playback. This symbol indicates that the function you selected is not permitted by your player or specific media. Playback options Remote control functions The following functions are applicable only to DVD discs. If other disc formats are played, screen display and operation will be different. • CLEAR-This button can be used to clear any incorrect information that may have been input. • SEARCH-Press this button one time and the screen will open the Search menu. Press it a second time to cancel the search function. In the search menu you can press or to highlight the item what you want, then press OK to confirm. • DVD MENU-Press this button to display the root menu, then select an item according to your preference. (Valid on DVDs with multi-layer menus.) • SETUP-Press this button to display the on-screen setup menu. • AUDIO-Press this button to change the audio mode (such as Audio 1/2-AC 3 2 CH English, or Audio 2/2- AC 3 5.1 CH English). Note: When this button is pressed repeatedly, you must wait approximately three seconds. • SUBTITLE-Press this button and the screen displays "SUBTITLE 01/XX XXXXX." "01" indicates the ordinal number of this language, "XX" indicates total number of languages available, and "XXXXXX" is the language. (The number of languages available depends on the DVD). • ZOOM-Press this button to zoom in on the picture. Each time you press the button, the magnification level will change. • TOP MENU-Press this button to display the title menu (available on some DVDs). • REPEAT-Press once to repeat a Chapter. Press twice to repeat a Title. Press three times to repeat All. Press four times to cancel repeat. • A-B REPEAT-Press once to select a starting point to repeat, then press again to set the end point. The selected section will be repeated. Press a third time to cancel. • ANGLE-Press to view the action from different angles (not available on all DVDs). • PROGRAM-Press to display the program information window. Press the number buttons to input the program number what you want. When finished, move the cursor to select the Start logo. The program starts playback and the screen displays "Program." To cancel, press , then press OK. • RESOLUTION-Press to set the video output resolution. Options include: 480i, 480p, 720p, 1080i, 1080p, and Auto. Note: Setting a resolution your TV cannot support could result in an unstable picture or a loss of picture. Check your TV manual for more information.