E-Z-GO 2Five Owner Manual - Page 89
Light Bulb Replacement
View all E-Z-GO 2Five manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. LIGHT BULB REPLACEMENT To reduce the possibility of premature bulb failure, do not touch new bulbs with bare fingers. Use clean, dry tissue or paper towel to handle the glass portion of the bulb. Headlight Bulb Replacement Make sure that the vehicle key switch is in the OFF position and the key has been removed. For vehicles equipped with lights mounted in the cowl, locate the headlight bulb socket on the backside of the light assembly. 1. Disconnect the accessory harness (5) from the light bulb. 2. Turn the headlight bulb (3) clockwise and pull to remove. 3. Align the bulb with the opening in the back of the headlight assembly. 4. Turn the bulb (3) counterclockwise until it stops. 3 5. Connect the accessory harness (5) to the light bulb (3). . 5 2Five Owner's Guide 81