E-Z-GO 2Five Owner Manual - Page 95
THIS PROCEDURE SHOULD ONLY BE PERFORMED BY QUALIFIED TRAINED, PERSONNEL., Move the vehicle to desired
View all E-Z-GO 2Five manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
MAINTENANCE PROCEDURES Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers. THIS PROCEDURE SHOULD ONLY BE PERFORMED BY QUALIFIED TRAINED PERSONNEL. Make sure that the key is in the 'OFF' position and the tires are chocked to prevent the vehicle moving; then perform the following: 1. Locate the 'Auxiliary Power' line (3) and remove the weather pack seal (4) from the connector. 2. Locate the 'Primary Power' line connector (1) and disconnect it from line (2). 3. Connect the 'Auxiliary Power' line (3) to the 'Primary Power' line (1) which will release the brake. If the tires are not chocked and the vehicle is not on flat ground the vehicle will move immediately. 4. Move the vehicle to desired, safe location and chock the tires immediately. 5. Disconnect the 'Auxiliary Power' line (3) from the 'Primary Power' line (1). 6. Connect the 'Primary Power' line (1) to line (2). 7. Replace the weather pack seal (4) on the 'Auxiliary Power' line connector (3). 2Five Owner's Guide 87