EdgeStar AP13500G Owners Manual - Page 16
Draining the Unit
View all EdgeStar AP13500G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Draining the Unit Moisture that is collected during the Cool and Dry (dehumidify) modes will condense in an internal tank and will then be evaporated and exhausted out of the exhaust hose. In most cases, there will be no need to manually drain your portable air conditioner; however, in humid conditions the internal tank may fill completely which will cause the unit to automatically shut off. When the internal tank is full, an alarm will sounds and the LED window will display error code "H8". When this occurs, the tank must be drained manually into a drain pain or other suitable drain. Installation of Drain Hose 1 Remove the drain cap from the drainage port. The drain cap is connected to the unit with a cord to prevent the cap from being misplaced. 2 Attach the drainage pipe clip to the back panel of the air conditioner with the screw provided as indicated in the diagram. 3 Attach one end of the drain hose to the drain port with the pipe hoop provided. 4 Insert the rubber plug into the other end of the drain hose, secure with pipe hoop and attach to drain pipe clip. EdgeStar Portable Air Conditioner 12