EdgeStar AP13500G Owners Manual - Page 8
Window Kit Installation Instructions
View all EdgeStar AP13500G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Window Kit Installation Instructions The window kit can be installed in either a double-hung sash window or in a sliding sash window. Please refer to the instructions below that pertain to your specific window type. Installation in a Double-hung Window 1 Attach Grille Attach the protective grille (baffle) to the window panel. Push the grille firmly to ensure that its four raised tabs are attached firmly into the window panel. Assemble Window Panel To assemble with window panel, start by measuring the width of the window opening where the window panel will be installed. 2 If the inner width of the window is between 22" and 24" wide: o Remove the adjustment panel from the window panel, and cut the window panel to the same width as the window opening. NOTE: The window panel cannot be installed in windows less than 22" wide as you will be unable to shut the exhaust cover If the inner width of the window is between 24" and 36" wide: o Slide the adjustment panel to fit the window frame width. If the inner width of the window is between 36" and 64" wide: o Attach the extension panel to the window panel. o Slide the adjustment panel to fit the window frame width. EdgeStar Portable Air Conditioner 4