Edimax BR-6478AC User Manual - Page 26
WPS Setup, Reset to Factory Default Settings, flashing.
View all Edimax BR-6478AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
II‐4. WPS Setup If your wireless device supports WPS (Wi‐Fi Protected Setup) then you can use this method to connect to the BR‐6478AC's Wi‐Fi network. 1. Press the WPS button on the BR‐6478AC for 2 - 5 seconds to activate WPS. The WLAN LED will be lighted on to indicate that WPS is active. 2. Within two minutes, press the WPS button on the wireless device/client to activate its WPS. 3. The devices will establish a connection. Repeat for additional wireless devices. Please check the instructions for your wireless device for how long you need to hold down its WPS button to activate WPS. II‐5. Reset to Factory Default Settings If you experience problems with your BR‐6478AC, you can reset the device back to its factory settings. This resets all settings back to default. 1. Press and hold the WPS/Reset button found on the back panel for at least 10 seconds, until the power LED begins to flash. 2. Release the button when the power LED is flashing. 3. Wait for the BR‐6478AC to restart. The BR‐6478AC is ready for setup when the power LED displays on. 22