Edimax ES-5808PHG Manual - Page 22
Quality of Service QoS
View all Edimax ES-5808PHG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Figure 1-10-2 Quality of Service (QoS) In QoS Mode, select QoS Disabled, 802.1p, or DSCP to configure the related parameters. QoS Configuration ¾ Strict: Services the egress queues in sequential order, transmitting all traffic in the higher priority queues before servicing lower priority queues. ¾ WRR: Weighted Round-Robin shares bandwidth at the egress ports by using scheduling weights with default values of 1, 2, 4, 8 for queues 0 through 7, respectively. (This is the default selection.) ※Note: WRR can only be selected if Jumbo Frame mode is disabled on the Port Configuration page 21
21
Figure 1-10-2
Quality of Service (QoS)
In QoS Mode, select QoS Disabled, 802.1p, or DSCP to configure the related
parameters.
QoS Configuration
¾
Strict: Services the egress queues in sequential order, transmitting all traffic
in the higher priority queues before servicing lower priority queues.
¾
WRR: Weighted Round-Robin shares bandwidth at the egress ports by
using scheduling weights with default values of 1, 2, 4, 8 for queues 0
through 7, respectively. (This is the default selection.)
※
Note: WRR can only be selected if Jumbo Frame mode is disabled on the
Port Configuration page